Do you know where you can get 64 4 door sill plates for a falcon sedan I have looked for a while and cant find any?
Do you know where you can get 64 4 door sill plates for a falcon sedan I have looked for a while and cant find any?
Are you talking the shiny bits you see when you open the door? They make them for convertibles and 2-door sedans, I know, but not sure about 4-door parts.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Yes the shiny pieces that hold the carpet to the side under the door, I heard they are hard to find because you have to find new old stock ones.
That's probably true. Not sure why they'd not be making them for 4-doors, since they'd probably fit wagons and sedan - I think. Never had either, so just guessing. If you have a set that are decent you can strip the anodizing and then polish them up and clear-coat them. Good luck either way.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
If you're still searching.
There's a set for 60-62 on evilbay at the moment:
I think these could/should fit a 64 as well, or at least be a nice proxy.
rear:
https://www.ebay.com/itm/1960-1962-F...0AAOSwxsNfnkC6
front
https://www.ebay.com/itm/1960-1962-F...cAAOSwV~lfk~qT
Greetz, Rinke
Bookmarks