Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 48

Thread: Cleaning up Vikingblu

  1. #31
    Have yet to start a search. Not really thinking about it this year. I only know from looking for 13"rs when I was shopping for the '62 Comet; the one Gina now has. Ended up going black-wall in the end.

    I know there is also Coker tire, but not really sure I want to pay the premium pricing once I go there. My current tires look brand-spanking new. Even have a spare with zero miles on it. They were bought new in '97 or so and have long since expired their 10-year safety lifespan. I suspect if I have issues with one; puncture or something; no tire shop will touch them after 10 years. Maybe Guido's tire shop will. No offence to Guido.

    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  2. #32

    Exhaust manifold

    Got a new exhaust manifold. Match ported it to the gasket. Ran it over a flat table belt sander to insure the ports were flat.
    Removed all the bolts and studs with NO issues, yay.
    Sounds good, no leaks.
    Attached Images Attached Images
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  3. #33

    Front brakes

    Should be able to finish up the front brakes this weekend.
    Shoes, Hoses, cyls, bearings, seals.
    Will spin the drums on the lathe.
    Radiator, cap, belt, and hoses next.
    Attached Images Attached Images
    Last edited by Vikingblu; July 30th, 2017 at 03:39 AM. Reason: pic
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  4. #34
    Quote Originally Posted by Vikingblu View Post
    Got a new exhaust manifold. Match ported it to the gasket. Ran it over a flat table belt sander to insure the ports were flat.
    Removed all the bolts and studs with NO issues, yay.
    Sounds good, no leaks.
    You mean to say that couldn't be sealed with JB Weld?
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  5. #35
    Quote Originally Posted by Luva65wagon View Post
    You mean to say that couldn't be sealed with JB Weld?
    Oops. thought that stuff was for imports

    finished up the shoes and stuff. cutting drums tomorrow.
    Attached Images Attached Images
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  6. #36
    Looking good! Do you have that lift at your house?
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  7. #37
    Quote Originally Posted by Luva65wagon View Post
    Looking good! Do you have that lift at your house?
    yes Roger.

    Drums cut, new races, bearings, seals, and a quart of dot4.
    Drove nice around the block.
    Now on to the original issue.....the radiator.
    Scott Drake $250
    Fluidyne $525
    Im a bit hesitant to have a radiator shipped. may just have the OG recored and soldered at Kens Radiator in Mount Vernon.
    I had them rebuild the rad for my 64 Datsun NL320. Very Nice work.
    Attached Images Attached Images
    Last edited by Vikingblu; August 6th, 2017 at 11:01 PM. Reason: text
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  8. #38

    64 fuel filler cap on a 63

    Websites say it doesnt fit.....
    Attached Images Attached Images
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  9. #39

    Back on the road

    New brass Radiator, hoses, clamps and coolant, just in time for a fathers day spin.
    Attached Images Attached Images
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  10. #40

    New master cyl

    Got the top latched after being stowed for 40 years lol. Road test new master cyl. 120 mi.
    Attached Images Attached Images
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  11. #41
    Looks a bit cold, but nice picture.

    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  12. #42

    Brrrr

    Thanks Roger. Yes it is a bit chilly. But the heater works! And I like to take advantage of nice weather when we have it. Not much sand on the roads yet.
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  13. #43

    Period wiper blades

    Was not a fan of the black plastic wiper blades.
    Looks much better imo.
    Attached Images Attached Images
    Dave M
    1963 Ford Falcon Futura convertible 170ci auto.
    Arlington Wa

  14. #44
    Join Date
    Jul 2013
    Location
    Federal Way
    Posts
    906
    Definitely
    Don Bartlett
    Federal Way, WA
    61 Four Door Sedan
    144-6, 3 on the tree



  15. #45
    Wipers? You let you car get wet!?!?
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •