Results 1 to 12 of 12

Thread: Did I leave this tool somewhere?

  1. #1

    Did I leave this tool somewhere?

    I hate it when I do this, but last night when I finally made it home I decided to do a couple more things in the garage, and when I tried to pull off the steering wheel I went to grab my harmonic balancer puller/steering wheel puller. Couldn't find it nowhere. So, before I buy another one (had this last one about 30+ years) figured I'd ask if maybe I left it somewhere. Can't honestly remember when I used it last.

    I know once I replace it the old one will magically appear.

    HMP.jpg
    Last edited by Luva65wagon; November 17th, 2016 at 02:04 PM.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  2. #2
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    It can be frustrating when you can't find/use your own tools. Good luck with your search.

    My latest tool purchase was upgraded tanks for my oxygen/acetylene set up. My old tanks were tiny and I was wearing a path to the welding shop for refills. These are the perfect size while still being portable.
    Attached Images Attached Images

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  3. #3
    As Jeff takes this picture with the same puller I'm missing on the floor under the tire of his motorcycle.

    hmmm.jpg

    You are a funny man, Jeff.

    Last edited by Luva65wagon; November 17th, 2016 at 10:28 PM.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  4. #4
    Join Date
    Dec 2006
    Location
    Mill Creek
    Posts
    1,226

    Did I leave this tool somewhere?

    You don't think he did that intentionally do you? LOL Jeff, where did you get your tanks. I need some. Larry
    Larry Smith
    1964 Futura
    347 stroker



  5. #5
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431


    I thought some may recall the story of the missing engine leveler chains from a few years ago. When I knew I had the same puller, I couldn't resist.

    Roger, you are welcome to borrow my puller. I too have had this one for about 20 years. The packaging wasn't quite the same as what you had pictured so I was sure to keep that different part cropped out of the photo.

    Larry, I bought my small tanks from Praxair in Seattle in 1996. When I just upgraded to the larger size, they gave me full price trade in. They have always been great to work with. I think they have branches all over.



    BTW, here is the engine leveler chain story, end of page 6...

    http://www.rainierfalcons.com/forums...?t=1470&page=6
    Last edited by Jeff W; November 18th, 2016 at 12:15 AM.

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  6. #6
    I remembered that story, but not loaning you my puller, so Larry, when Jeff replied I thought Hmm... Where's Waldo?

    Last I remember using it was at Gene's sons place. Probably still there. I made a steering wheel puller on Wednesday so I'm good for now.

    I have larger tanks than Jeff and I too bought them from Praxair. They have a store in Everett too, but are scattered everywhere. Been to the Ballard store many times.
    Last edited by Luva65wagon; November 18th, 2016 at 08:28 AM.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  7. #7
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    Due to some festering confusion, I wanted to post a picture of my Craftsman puller in it’s full, different that Roger’s, packaging.

    It is where it has always been, tucked in the drawer, next to its other Sears cousins and my vintage Snap 6 meter

    Attached Images Attached Images

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  8. #8
    Quote Originally Posted by Jeff W View Post
    Due to some festering confusion, I wanted to post a picture of my Craftsman puller in it’s full, different that Roger’s, packaging.

    It is where it has always been, tucked in the drawer, next to its other Sears cousins and my vintage Snap 6 meter

    To be clear, the picture I posted back then was from off the Internet. I didn't have mine to photograph. Mine looked EXACTLY like the set (of mine) you now have. Same wrinkle in the plastic package I had on mine in exactly the same spot. I knew it! Nice try Jeff. But that's fine, you can have them. Merry Christmas and Happy Birthday.



    (Disclaimer: This back and forth between Jeff and I is the same as, but way different and less deadly, than the Hatfield and McCoy feud. It will fester long after we are gone - carried on by our relatives. Sorry you all have to see this display of ill-will. And in case you were concerned, you can rest assured this is all in jest and Jeff and I are just having fun. Really we are. But see if I ever loan him a tool again.)
    Last edited by Luva65wagon; May 16th, 2019 at 09:57 AM.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  9. #9
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    1,431
    I see I gotta take this to the next level. Remember I am married to an accountant. I’ll submit my request for the 1995 receipt from the now closed SODO Sears.

    Broke my heart when that place closed... was my go to for two decades.

    Last year I went the the Sears in South Center and was again heartbroken to see all the empty shelves and pegs. I don’t want to have that vision be the lasting memory of my once “Happy Place”.

    Jeff Watson
    Seattle, WA
    '63 Tudor Wagon (170 - 3 spd.)

  10. #10
    Did you find your tool?

  11. #11
    Was never found, no. Had to get another.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  12. #12

    :)

    Quote Originally Posted by Luva65wagon View Post
    Was never found, no. Had to get another.
    Oh, that's too bad.

Similar Threads

  1. clutch alignment tool
    By Nathan289 in forum Tech Talk
    Replies: 5
    Last Post: August 25th, 2014, 11:03 AM
  2. Tool boxes available
    By Luva65wagon in forum Chit Chat
    Replies: 2
    Last Post: August 3rd, 2010, 10:32 AM
  3. Vertical Vent Window Tool NEEDED
    By SmithKid in forum Tech Talk
    Replies: 3
    Last Post: June 19th, 2008, 10:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •