PDA

View Full Version : Emergency Brake Cable



BadBird
January 12th, 2007, 09:57 AM
Anyone ever replace the emergency brake cable on a 64? I am trying to figure out how to replace the rubber that covers the cable where it goes through the frame. The old one has deteriorated and the new cables that you get don't include that piece.

Luva65wagon
June 19th, 2017, 11:14 PM
Gosh Larry, we even neglected you!

I used a piece of 3/8" or 1/2" fuel line when I redid mine.
[thumb]

BadBird
June 19th, 2017, 11:48 PM
Pretty quick response Roger, only took 10 1/2 years. THAT GUY WAS RIGHT. YOU ARE ALL JERKS. LOL. Might want to explain this to folks who may not understand my humor.
At the show Saturday, a gentlemen told Roger and I this club didn't respond to his query on our site. I told him I couldn't believe someone didn't answer all the posts. Well, mine proved me wrong. This is hilarious. Larry

Luva65wagon
June 20th, 2017, 08:10 AM
I did find nearly 4 pages (maybe 100 or so) zero response threads. Most were pre-2009, but those that I read, a lot of them, were just hey, check this out, as opposed to needing an answer. I never found his thread asking about CPP front ends. But it mighr be fun to go through and start answering those that needed answers. We might wake up the dead.

BadBird
June 21st, 2017, 11:12 AM
It is a shame if Roger has to add more of his time feeling responsible to answer every singe post himself.
I was reading the post by Scott Z. about his turn signals and I could have answered something about the flasher, but not being sure, I waited for someone else to chime in.
If, after the TFFN goes away as they say it will, I would suspect we will get even more posts. Maybe we should discuss this at our next meeting? Thanks Roger for your knowledge and willingness to spend the time helping us. Larry