68FalconSC
November 30th, 2008, 06:04 AM
Well, while not actually having done anything to my '68 SC yet, the parts hunting and planning stages have been moving ahead. My final plans are more or less in-place and I'm just trying to coordinate everything so that once the tear down commences around Sept-Oct '09, each step will more or less {hopefully more and not less, lol} flow from one to the next. I want to be finished no later than late April or early May 2010 as I plan on driving back to Michigan {where I grew up} for the 2010 Detroit Falcon Nationals.
Recently, I finally decided on a powerplant. I was cruising CL and came across a post where a guy was moving to SF and had 1 too many engines and so was giving 1 away for FREE ! Well, I called him right up and made arrangements for me and my son to go down to Ballard the next day to pick it up. What was it you ask ? Well, it's a '69 351W block w/ original crank still in and the stock factory '69 heads. Nothing else came with it but that's ok. It was still FREE and it doesn't appear to have been bored [thumb].
I've also decided on a tranny. My ex-bro-in-law are still good buds and he's a tranny builder. About a month or 2 ago, he swapped his original front bumper from his '57 Bel Air {it was pretty dinged up and rusty} for a T-5z from a 94/95 ? mustang cobra-r. He got it to give to me but he's going to go thru it first, adding a titanium nitrated gear cluster ? He says it should be good out to 450HP and 450-500 ft/lbs-TQ {my 351w should be about 350hp and 380tq when done}. Since I don't know jack about trannys, it sounds pretty impressive, lol, but it sounds like I shouldn't break it. Now you're probably thinking, "Wait ! Now that guy needs a bumper for his '57 !", right ? Nope. In '00, for Christmas, I got him an original one that had been straightened and triple chromed and I got it for a pittance of what it was worth at a swap meet.
Body and Paint are more than likely {he wants to inspect the car 1st before accepting the job} going to be done by a fellow Falconer-Body-Paint fella over in Spangle.
Going to replace the front buckets with a set from a 94/95 t-bird, in black cloth. Redo the rest of the interior in black.
Complete front end rebuild kit from Laurel Mountain Mustang.
9" nodular posi rear from a '79 ford econoline that my same bro-in-law put together.
All new electrical wiring {havent decided on a supplier yet}
and a few other items yet to be decided.
Oh, the body color is going to be Emerald Green Metallic.
Spits and spurts but progress is progress. Jon
Recently, I finally decided on a powerplant. I was cruising CL and came across a post where a guy was moving to SF and had 1 too many engines and so was giving 1 away for FREE ! Well, I called him right up and made arrangements for me and my son to go down to Ballard the next day to pick it up. What was it you ask ? Well, it's a '69 351W block w/ original crank still in and the stock factory '69 heads. Nothing else came with it but that's ok. It was still FREE and it doesn't appear to have been bored [thumb].
I've also decided on a tranny. My ex-bro-in-law are still good buds and he's a tranny builder. About a month or 2 ago, he swapped his original front bumper from his '57 Bel Air {it was pretty dinged up and rusty} for a T-5z from a 94/95 ? mustang cobra-r. He got it to give to me but he's going to go thru it first, adding a titanium nitrated gear cluster ? He says it should be good out to 450HP and 450-500 ft/lbs-TQ {my 351w should be about 350hp and 380tq when done}. Since I don't know jack about trannys, it sounds pretty impressive, lol, but it sounds like I shouldn't break it. Now you're probably thinking, "Wait ! Now that guy needs a bumper for his '57 !", right ? Nope. In '00, for Christmas, I got him an original one that had been straightened and triple chromed and I got it for a pittance of what it was worth at a swap meet.
Body and Paint are more than likely {he wants to inspect the car 1st before accepting the job} going to be done by a fellow Falconer-Body-Paint fella over in Spangle.
Going to replace the front buckets with a set from a 94/95 t-bird, in black cloth. Redo the rest of the interior in black.
Complete front end rebuild kit from Laurel Mountain Mustang.
9" nodular posi rear from a '79 ford econoline that my same bro-in-law put together.
All new electrical wiring {havent decided on a supplier yet}
and a few other items yet to be decided.
Oh, the body color is going to be Emerald Green Metallic.
Spits and spurts but progress is progress. Jon