PDA

View Full Version : 1961 amateur resto



raddler
January 27th, 2021, 02:19 PM
Hi just finished my car last summer no where to go hope next summer is better.

Luva65wagon
January 27th, 2021, 02:58 PM
Very nice. Looks like you have V8 suspension already, that's going help brake this bird. Very clean at every angle. Good job! Feel free to show more and detail some of the changes you've made. There are a few I can see.

And here's to hoping car events begin to happen again soon. I think we can all agree on that!

Panzer 14
January 27th, 2021, 04:12 PM
Really nice work. You did a fantastic job.

raddler
January 27th, 2021, 09:12 PM
Thanks for the reply's Got pictures from a 2k beater to now. I've done all the work except the narrowed rear and paint. I think the most challenging and the least covered project is the early interior, windows, headliner and wind lace if any one needs help or advice I can help.

gtaroger
January 28th, 2021, 02:01 PM
That's one really nice car. How does it perform with the engine mods?

raddler
January 28th, 2021, 03:05 PM
Great the 200 with headers, weber cab and dizzy makes the car move a million times better than the 144. But the biggest improvement for driving would be the power steering and brakes.

gtaroger
January 28th, 2021, 06:26 PM
One of the guys in my car club has a 300 in line six in his Maverick .He has plans to get a cylinder head and intake from a shop that bought out cliffard performance. From what I've read you can get 500 to 600 hp from the 300 six with all their parts.They claim that the crank is stronger in the six because it has more main bearing caps.Don't know myself but I think a warmed up six is cool. My cousin had a Pontiac Tempest convertible with a over head cam four barrel four speed . It was a great drive. Smooth as silk and ran pretty good.Great build. Roger

Luva65wagon
January 29th, 2021, 12:02 AM
Though I didn't build this motor... but I did end up with it when the owner had to let it go. Took a lot of work to finally get it running correctly (you can see the build here - Freddie Come Alive). But these heads are the way to go if you want to build a wowzer-200.

But the pyramids may have had more to do with it.

BadBird
January 29th, 2021, 09:35 PM
GTARoger, you mentioned that the car has a narrowed 9". Are you running wider tires? Can't tell from the pictures. Can you share you reasoning and processes in doing the narrowing? I am not sure what to do with the car I am going to build, so this interests me. If you have pics it would be nice. Thanks. Larry

Falcongek
January 31st, 2021, 01:43 PM
Nice looking falcon raddler, you must be proud of your acievements.

@ Luva65wagon OOh You've got a CI head?
Looks impressive [thumb]

Luva65wagon
February 2nd, 2021, 09:48 PM
@ Luva65wagon OOh You've got a CI head?
Looks impressive [thumb]

For a short while. You can search this forum for anything Freddie and see all the previous owners life with it and mine is the single thread making Freddie live with this CI (now VI) head. It's a sad, sweet, story...

gtaroger
February 3rd, 2021, 09:57 AM
BadBIRD, The rear end on my car is narrowed . I do not know has much.The builder installed a custom four link and a aftermarket housing(Currie).I think if I were you I would go with a narrowed housing and mini tubes as to where You could get some nice sized tires back there. 7443