Horn wireing

[Gustus]

Does anyone have a diagram for a 61 Falcon steering column. I installed a new turn signal switch but the horn mechanism had been removed and I am not sure how the horn wire attaches to the horn button. I must be missing a part. Thanks

[ew1usnr]

Here are a couple diagrams of a 62 - 64 steering column:

Re: 1964 Falcon Steering Column - Exploded View



http://www.1bad6t.com/diagrams/FalconSteeringColumn.gif (http://www.1bad6t.com/diagrams/FalconSteeringColumn.gif)
http://www.1bad6t.com/diagrams/FalconSteeringGear.gif (http://www.1bad6t.com/diagrams/FalconSteeringGear.gif)
__________________

[Gustus]

Internet has been down. thanks

[doghows]

Check out the thread steering column help that I posted. Roger put up an excellent diagram for the switch.

[Gustus]

My problem is there has to be parts missing because there is nowhere to hook up the horn wire. Rogers diagram is good but the part I need is the part the horn wire is attached to (the picture is a little blury). I need to figure out what part to order. If the parts on the diagam were named I would be in the $.

[Luva65wagon]

The 60-62 setup is different than I have looked at. I googled it and it shows every style under the sun in the search, so not sure what to offer without seeing one. I looked at FalconParts.com and they have all the bits, it appears, so maybe a quick call to Ron down there will get you what you need.

[Gustus]

I think my problem is solved. I just pulled a steering column at a wrecking yard. As long as all the original parts are in tack, I'm good to go.
Thanks for the help

[falcon cobra]

Well thats good, do the yards over there still have falcons? if so how many and what years and ect. thanks...jh:rocker:

[Gustus]

South Hill Auto Wrecking in Puyallup has 3 61's. One 4 dr and 2 2drs. Thier in pretty rough shape but there are some decent parts and stainless mouldings. Are you looking for anything in particular?