Need a throttle linkage diagram for a 1963 260 V-8

[ew1usnr]

Hello,

I am the proud and fortunate owner of a 1963 Falcon with a 260 V-8 and a two-speed Ford-O-Matic transmission.

If someone has a parts book, could you please post a photo of a drawing for the throttle linkage assembly for a Falcon with that engine/transmission combination? I have a drawing (below, click on it to make it bigger) of a 1965 Mustang assembly, but it is not quite the same as what the Falcon had.

Thanks, Dennis in Tampa.


2766

[Jeff W]

I don't know if this is a help or not. It's scanned from my 60-62 Shop Manual with the 1963 supplement. The only diagram I found looks to be for the I6... nothing was shown in the supplemental section with the 260-289 information.

[ew1usnr]

Hello, Jeff.

Thank you for your assistance. I found my needed part and was able to purchase it off e-bay. "1963 ½ FORD FALCON 260 V8 BELL CRANK AUTO TRANS KICKDOWN THROTTLE ACCELERATOR"

This will make my 260 V-8 hardtop and Ford-O-Matic dance and sing! I love my two-speed Ford-O-Matic!

Dennis - A happy guy in Tampa.

http://www.rainierfalcons.com/forums/attachment.php?attachmentid=2776&thumb=1&d=1364009658 (http://www.rainierfalcons.com/forums/attachment.php?attachmentid=2776&d=1364009658)

http://www.rainierfalcons.com/forums/attachment.php?attachmentid=2777&thumb=1&d=1364009671 (http://www.rainierfalcons.com/forums/attachment.php?attachmentid=2777&d=1364009671)