View Full Version : Oil Pan Wont Fit
Dalton
August 25th, 2012, 02:35 PM
I'm putting a 200ci from a 78 Fairmount into my 64 Falcon Futura and the oil pan hits the center link. Does anybody have any recommendations on what oil pan to use.
pbrown
August 25th, 2012, 10:09 PM
You need to find an early L6 pan. The pan you have is the dual sump style. You need the front sump type. What happened to your old engine? Use that pan if you have it.
Dalton
August 26th, 2012, 04:17 PM
Hmm i'll be looking for one because I sold my old engine.
Luva65wagon
August 27th, 2012, 02:51 PM
Maybe Steve has one from his recent swap? These pans should be around with as many engines people have swapped lately.
redfalken
August 27th, 2012, 06:26 PM
Hey Dalton,
If you don't find one, I have one you can have for free. It's in the recycling pile at work and is in good shape.
The only reason I replaced it was that I always had a tough time getting the drain plug to seal. I did finally find some washers that have rubber around the center hole that worked really well though. I may even have a couple of these washers leftover if you want them. When I rebuilt my current 200 I found another pan in good shape so I went ahead and just used it.
Dalton
August 27th, 2012, 09:55 PM
Thanks but it looks like I found the right pan from my neighbor. Is the oil pan that I have not a very common one? It seems like any other pan out there would fit.
pbrown
August 27th, 2012, 10:20 PM
The pan design changed in 74 with the addition of the Mustang II and the later in 79 with the Fox body chassis. Fitting engines from cars newer than 74 this require finding pans from pre-74 cars. The same rules apply to the V8 guys.
doghows
August 28th, 2012, 12:23 PM
I feel the pan pain. Just went through it with the 302 swap. Glad you got it worked out. Now get it running for the mini regional we need a good showing!!!...
P.S. anybody have a spare weekend and want to help work on a van?? Still need to do the brakes and fix the shift linkage and I only have three weekends left....
Dalton
September 25th, 2012, 02:21 PM
Well it turns out my neighbor didn't have an oil pan so I am looking for another one. Kenny does that offer still stand? If not no big deal I'm willing to buy one.
redfalken
September 25th, 2012, 03:43 PM
It's all yours. I'll bring it home today. Let me know when or how you want to get it.
Dalton
September 25th, 2012, 04:06 PM
Ok thanks so much, I'll let you know when I can come get it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.