PDA

View Full Version : FS v8 fordomatic



Nathan289
June 30th, 2012, 09:45 PM
I have a 2spd fordomatic for sale.. its out of a 63.5 sprint.
flexplate and torque converter included.. it worked.. it shifted slow some days and hard on others.. fluid level wasnt an issue..
i replaced the vacuum module without much change.. im thinking my bad head gaskets and poor vacuum were an issue..

It looks like it might have been rebuilt once.. silverish paint...

I even have cooler lines....

Make offer...

Nathan

Nathan289
July 12th, 2012, 10:36 PM
Pedal assembly
shift tube
collar w/ gear indicator
turn signal switch. Has broken cancel tabs
neutral safety switch with back up lights... plus contacts that attach to shift tube...
Trans mount and cantalevier.

Just about everything needed to convert a manual trans car to auto.

Will trade any of my parts for a 63 v8 zbar, or a fresh air box for the drivers side.

Nathan

Nathan289
July 24th, 2012, 09:16 AM
Here is an updated list.

I have the block plate for a 260 v8.
Flex plate for the 260.
fordomatic transmission w/ torque converter
transmission cross member and mount
trans cooler lines factory pre bent.
radiator with trans cooler. No leaks
slip yoke for 2 speed.

V8 bell crank assembly missing kick down rod.

Inner shift tube from column
Automatic shift collar
shift arms and linkage

Neutral safety switch that includes back up lights. Also have the contacts that attached to the column.
turn signal switch that works but the turn cancel arms are broken. You can buy a repair kit for it.

Make me an offer.. i'll even deliver for the price of gas.. pick up get 30 mpg...

Nathan

Nathan289
August 3rd, 2012, 11:48 AM
All the interior parts are sold..

Still have v8 trans and under car parts...

$50 or offer..

Nathan