Right Angle Pigtail

[BPVan]

I am wrapping up the electrical portion of the motor and was in need of those hard to find right angle boot connectors for both the starter solenoid switch and the water/oil sending units.:confused: I found some at the link below. I am sure I will have some extras if anyone needs them.

http://www.clipsandfasteners.com/Right_Angle_Pigtail_W_11_1_2_Wire_Lead_p/a13644.htm

[Jeff W]

I'll buy some off of you... I'll count tonight but I think I have four needed.

[Jeff W]

Dude... I'm home and I CAN'T count how many I need. Imagine my surprise when I opened the garage door (more like unzipped) and realized my car is at the paint shop.

I need a vacation.

[BPVan]

I would start with a beer, that will buy you a little courage to help you tell the family you will be gone for a week or so. I have 2 packages coming so I'm sure I'll have enough to cover you.

[SmithKid]

I'll buy a couple, if you have any left, just to have them around.

[Luva65wagon]

What a great site! If this is in our resources page I missed it -- and if it isn't, it should be. There goes my wallet opening up again!

Gene, if you haven't ordered those cage nuts - they have them here! Let me know and if you haven't I'll order them here.

As for the wiring -- this is why when I find an old set of wiring in a car at the Pick and Pull a Part - I try to get it. But there are a few things here on this site I may just have to get too. I suspect an influx of Seattle/Everett orders hitting this place.

[BPVan]

Gene - I will definitely have some left, I'll set a few aside for you.

I have been meaning to post a picture of the cage nuts I found at StoneWay Hardware for a little over $1 each, the are 5/16-18. Not sure what price you are getting on them but if it is significantly cheaper I am in for about 10 more. My doghouse is mounted with these all the way around and I'm sure you can guess what shape the originals are in.

[Luva65wagon]

Brian,

Did they have any other sizes. I keep forgetting about that place, but they do have a pretty good assortment of screws.

I checked at Tacoma Screw today - but they would have to special order a box of them. I think I need to run over their at lunch and have a look-see.

[BPVan]

5/16-18 is the largest I found, they also have 1/4-20, 10-24, and a few others. I did not see a 5/16 with more T.P.I.

[Luva65wagon]

I ran by there at lunch and cleared them out. They didn't have the 3/8" size I needed. I may hit the Pick-a-Part again tomorrow to see if I can steal uh, I mean buy, these off of any other vehicle they may have. I swung by yesterday, but never thought to check for these then.

I was looking for a cable accelerator pedal assy and couldn't find anything I liked off a Ford. With the hail beginning to fall and Gene waiting for me at my place I sort of scooted quickly. May have to scout the Chebbies or Mo[re]par[t]s. Possibly even something metric.

Jeff, I think you grabbed something cable accelerator off of something as I recall. What did you get? I ain't gonna spend $200 for a Lokar thingymajig.

[Jeff W]

Jeff, I think you grabbed something cable accelerator off of something as I recall. What did you get? I ain't gonna spend $200 for a Lokar thingymajig.

It was off a Fairmont or LTD... I grabbed two complete assemblies but gave the cable part of one assy to Pat. If you just need the peddle bit, you can have my spare...

[Luva65wagon]

I need the whole kit and kaboodle if I'm going to do it. I'll poke around in the PnP. Always need an excuse to walk the rows of wrecks.

[Jeff W]

Keep your eyes open for Maverick/Comet with 4-lug 8"... you have my cell.

[BPVan]

Roger I pulled a throttle assembly assembly out of a late 70's F150. I was going to use the brackets but found I do not need them. You are welcome to it.

[falcon cobra]

I got a throttle pdl. at www.speedwaymotors.com (http://www.speedwaymotors.com) for my truck #916-55012 and rigged it to work with a cable...john h