Rear End Needed

[Learning Fast...]

Gentlemen:

I am searching for a used rear end for a stock 1968 4DR Futura. The existing one died violently. 6cyl 170CID, (at least that's what I thought, recently decoding the VIN indicates a 200CID...I'll check on this futher).

Please let me know if any futher specs are required.

Thanks for any help you can provide,

Derek
La Conner, WA

[pbrown]

It is an 8" rear end? If so you should be able to find a complete center section easily.

[redfalken]

Here's a link to a photo that shows the 8" and 7.25" side by side. An 8" would be much easier to find parts for. I found mine at the Pull-a-Part up in Lynnwood.

http://www.redfalken.com/pages/rearend.html

[malodin]

man i wish i had seen this about a month ago i just let a stock 6cyl rearend go with the 68 2dr i parted out, oh well. there is a guy in everett that has a 4dr for 200.

[Learning Fast.....]

Gentllemen:

Thanks for your time and information in your replies. I think I found a replacement in Vancouver WA, and will be making a trip there soon to verify.

Pictures of the problem rear end:
http://pg.photos.yahoo.com/ph/hiquadatch/album?.dir=10d1scd&.src=ph&store=&prodid=&.done=http%3a//pg.photos.yahoo.com/ph/hiquadatch/my_photos

Thanks again for the info. I'll post again if the part hunt in Vancouver doesn't work out.

Sincerely,

Derek
La Conner, WA

[redfalken]

If it's a 7.25", there's one in Puyallup for $20. It's on craigslist:

http://seattle.craigslist.org/tac/pts/297723678.html

[Murff]

If you are still looking I have an 8" out of my '68 that I don't need.

I saw this post this morning on my first visit to this site and decided I had better join just so I could reply and maybe save you a trip to Vancouver. I'm in Federal Way which should be a little closer.

Have some other left over '68 stuff, too. Mostly interior and the like. I'll be at Pacific Raceways tomorrow (4/7) but should be home most the day on Sunday.

Let me know.

Murff