I'm in need of a vent window for the driver side of my 1960 Comet. The pivot on the bottom has rusted off. Anybody got one? or knows someone who does...? thanks for the help!
I'm in need of a vent window for the driver side of my 1960 Comet. The pivot on the bottom has rusted off. Anybody got one? or knows someone who does...? thanks for the help!
Last edited by pbrown; April 14th, 2013 at 07:14 PM. Reason: corrected title
I'm pretty sure the 60 to 63 Falcon and Comet sedan wing windows are all same. 64 and 65 may be also. I don't have one for you but it widens the possibilities.
Jeff Watson
Seattle, WA
'63 Tudor Wagon (170 - 3 spd.)
If you want to find it locally you could check with Jake at Original Falcon Interiors.
http://home.earthlink.net/~falconcomet1963/
Besides upholstery he also has a horde of parts.
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
I've got the wing window on the long post but the handle is missing and I have just the wing not on the post but with the handle. Hope this discription makes sense.
Gina
I collected a few of these over the years. How many I have at the moment I don't know - will have to look when I can. Probably can't get to that until this weekend.
What Gina seems to be saying ( ) is that she has one complete wing assembly including the frame and division bar, but it is missing the latch handle and she has another with the latch handle, but doesn't have the long "division bar" attached or possibly not even the outer frame. This would probably mean (assuming the gasket on one of hers or yours is good) you can maybe make one good one out of two or three. That is usually what is required anyway...
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Bookmarks