I was talking withLuva65wagon about the export brace on my Falcon. Has any of you guys have any ideals on a design for one.I like the looks of the tube export brace ,but don't like the heim-joints. I was thinking about two tubes running from the fire wall to the shock towers with the tubes welded to the bracket to the fire wall and the other end welded to the plate that bolts to the shock tower. Maybe cut the tubes at one end and install a screw type adjustments .That way you could mount the brace and then preload it.Also make one bar that goes across the fender aprons like you see on some of the old Shelby Mustang.If you space the two tower tube braces enough ,you con weld a plate between them. Maybe cut out Falcon in the plate. If made of aluminum or stainless steel you could polish it out.I want to run a export brace .but something that looks better than the stock brace.