Results 1 to 15 of 19

Thread: Collector car insurance

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Carpet installation

    Hi Jerry,

    Installing my carpet didn't turn out as bad as it was looking. I had some issues with my rear carpet peice which came up short. I was able to use my wife's clothing steamer to stretch it. I also spent time smoothing all the wrinkles out. I would use some 3m spray adhesive to tack the corners down and carpet to the padding. Lining up the seatbelt mounts was a little tricky. I would start from one side making sure you have enough carpet to tuck under each threshhold plate before you cut the holes in the carpet. I cut a small hole in the carpet over the mount and pushed it down over whick made a snug fit. I have heard that some people spray down the carpet first to relax it for a better fit. I hope this helps you. Dont,t forget to walk away for a while if you get frustrated.

    Sean

  2. #2
    Hey Jerry, I usually lay out the carpet and then take a poker, like a toad stabber, to locate the hole edges, then a sharp knife into the hole and cut a perfect circle, using the hole as a guide. Helps to find screw holes as well. Larger holes, I try to leave that to precise measurements from key components, or if, like a shifter hole, you can get a rough location to start and then pull the carpet over and continue to trim away a little at a time until it is all the way down.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  3. #3

    Carpet

    I just put new carpet in my Comet this weekend. All went well. One way I do holes is by using a soldering iron to actually melt through the carpet - such as the holes where the front seat tracks go through the floor, seat belt holes, etc. The heat sort of "cauterizes" the loops so they don't unravel.
    1960 Comet
    1967 Cougar XR7
    www.lattemom.typepad.com/cougar

  4. #4
    Guys,

    If we are going to talk carpet, let's start a new thread. This topic is for insurance.
    Patrick Brown
    331 Stroker / T5 / 8" / Wilwood Disks / RRS R&P Steering / Megasquirt EFI


  5. #5
    Join Date
    Oct 2006
    Location
    Kenmore, WA
    Posts
    254
    Silverbird,

    I have ANPAC insurance, and when added up I think the falcon costs me less than $10/month for full coverage. I don't do it so much for the full coverage (my car's only valued at about $3k right now, and I've got more than double that into it), but the cheap rates since I drive it so little. The only catch is you have to have another car on the same policy as a daily driver, and the collector car has to be in a secure garage space.
    Thor Johnson
    www.flickr.com/photos/sedanman
    Low & Slow '64 2dr Sedan
    Stock(for now)200 I-6, Lokar shifted C-4, Wedge kit,V-8 coils, dropped granada spindles/discs,GT leaves,3.0 8 inch

  6. #6
    Thor,

    I think this is common with them all. I guess you can't ride a bicycle to work and own a collector car, can you?

    Sounds like they're all hitting about the same cost.
    Roger Moore

    63 "Flarechero"
    powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear



  7. #7
    Join Date
    Oct 2006
    Location
    Kenmore, WA
    Posts
    254
    Hi Roger,

    I think they are all about the same price, but I've heard ANPAC does not offer the best coverage, so I've been waiting until I get a new daily driver to compare/change companies.

    When I put the falcon in storage a few years back for the winter during a move I checked into dropping the coverage, but they don't allow you to drop coverage on a car and then start it up again. Being it was less than 10 bucks a month I didn't bother.
    Thor Johnson
    www.flickr.com/photos/sedanman
    Low & Slow '64 2dr Sedan
    Stock(for now)200 I-6, Lokar shifted C-4, Wedge kit,V-8 coils, dropped granada spindles/discs,GT leaves,3.0 8 inch

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •