Hi Jerry,

Installing my carpet didn't turn out as bad as it was looking. I had some issues with my rear carpet peice which came up short. I was able to use my wife's clothing steamer to stretch it. I also spent time smoothing all the wrinkles out. I would use some 3m spray adhesive to tack the corners down and carpet to the padding. Lining up the seatbelt mounts was a little tricky. I would start from one side making sure you have enough carpet to tuck under each threshhold plate before you cut the holes in the carpet. I cut a small hole in the carpet over the mount and pushed it down over whick made a snug fit. I have heard that some people spray down the carpet first to relax it for a better fit. I hope this helps you. Dont,t forget to walk away for a while if you get frustrated.

Sean