Winter 23/24 Work - EFI Rewire

[pbrown]

Here is some work on the under dash sub-harness. This connects the rear of the bulkhead fittings to the new EFI controller. It's not complete. I need to get the shielded wire for the 36-1 crank wheel done plus any of the stock Falcon wiring such as headlights, turn signals, horn, fan, etc..

MS3_Sub_Harness.jpg


This is what it looks like installed. The green tape was just to help me keep wires straight while building.
MS3_Sub_Harness_Installed.jpg

[Luva65wagon]

I just did a Sniper 1 install on my mine last year. Wouldn't you know it they release a version 2 just a few months later.



I'm betting yours will be less buggy. So far (no miles on it since I completed it in November), so good.

[pbrown]

I had to step away for a while. I came back home and found this. It's an under dash booster setup. This will cleanup the engine side of the firewall.


Falcon Under Dash Booster.jpg