My 62 Ranchero leaks water in from the door seals. In checking the problem out it seems the door jamb itself is the issue. Door seals are original, and still soft and not torn. But there is a gap at the top corner where the seal rounds the back edge of the window frame and the body upright pillar and top horizontal rail makes a square edge. I tried welding a blob of filler to give something to seal against but this should not ever be needed. It still leaks and it appears another 1/4" of fill is needed! Or raise the door up making the back edge body lines a bunch higher than the quarter panel. Anyone else have issues like this? And yes i know the seal bends inwards , it has nothing to snub against. IMG_1205.jpgIMG_1204.jpg