63 Falcon Gasser Build

[BadBird]

Carol and I just got back from a while in Tucson Arizona. Worked on my brothers 64 Fairlane Thunderbolt clone. Now I want to get back to mine. I will update soon I hope. Larry

[BadBird]

I haven't done much on the car lately, but back problems are indeed a pain. So, I bought some more stuff just to keep busy. I ordered a 351 Level 20 roller block from DSS Racing. I also ordered their main support. I had the DSS 347 short block in the 64 and it did a good job on the street and racing. So, after talking to them they recommended this block for the stroker 427 I am going to install. D.S.S. Racing - Main Support System And Pro-Tray Windage Control<meta name="description" content="D.S.S. Racing's Main Support System Dampens Harmful Harmonics That Cause Cap Walk And Can Crack Engine Blocks. The Main Support System Is Affordable And Easily Installed. D.S.S. Also Offers Increased HP With The Pro-Tray Windage Control."> (dssracing.com)

D.S.S. RACE-PREPPED ENGINE BLOCKS


D.S.S. LEVEL 20 CNC RACE PREPPED BLOCKS ARE TECHNOLOGICALLY ADVANCED. OUR ULTRA SEAL CYLINDER PREP IS VERY DETAILED AND TIME CONSUMING, HOWEVER IT PROVIDES RING SEAL AND POWER SECOND TO NONE.


YOU COULD SETTLE FOR AVERAGE PERFORMANCE, BUT WHY? 20 CNC RACE PREPPED BLOCKS GIVE YOU POWER YOU CAN FEEL AND THE WINNING ADVANTAGE YOU DESIRE. THIS SYSTEM HAS BEEN RACE PROVEN IN NUMEROUS 650+ HP PRODUCTION BLOCKS.

Over 35 blueprinting operations. Dyno proven to produce 40+HP over a standard
production block. Level 20 have advanced features like our Elliptical Cylinder
Chamfer (on non big bore blocks) and threaded freeze plugs CNC stroker clearanced
for 331/347 or 408/427 providing you the ultimate block for easy, do-it-yourself
stroker engine assembly.





D.S.S. Has designed and built a new engine block fixturing system. This fixture
locates the engine block of the main and cam bore centerlines, exclusively (not
the oil pan rails like most other CNC block fixtures). It is this advancement that
gives us the ability to produce an extremely true engine block, aiding in the production
of horsepower and longevity.

Description

Level 20 CNC prepped 351W production Hyd roller ready block, uses a 1 piece rear main seal. Over 35 blueprinting operations. Dyno proven to pRoduce 40+HP over a standard prepped production block. CNC Stroker clearanced for most 408/427 Stroker kits providing the ultimate in easy do-it-yourself Stroker engine assembly. Our Race prepped Production blocks do not come with main cap hardware, the bolts in the main caps are intended to secure the caps during shipping only. We suggest using one of our main support systems or a main stud kit.

[BadBird]

Got a couple of pictures of the block that DSS Racing is shipping tomorrow. Larryengine1.jpgengine3.jpg