What was the original radiator?

[ew1usnr]

Hum mm....did you ask them if you just return it for a bigger size?

I plugged a piece of 1/4" tubing onto the short internal overflow tube and used a razor blade to cut the tubing off near the top of the tank. This raised the internal overflow height by about 2 1/4" inches and increased the effective tank capacity from 33 oz to 41 oz, by my calculations.

1 IMG_0486.jpg

The larger expansion tank installed with no problems other than I had to drill one new mounting hole in the radiator frame.

4 IMG_0491.jpg

The new tank does not interfere with closing the hood so it looks like the Falcon is good to go.

8 IMG_0496.jpg