Anyone have a pedal assembly for the manual shift? I am in need of that if anyone has one just gathering dust. Let me know if you do and how much you want for it. Thanks Larry
Anyone have a pedal assembly for the manual shift? I am in need of that if anyone has one just gathering dust. Let me know if you do and how much you want for it. Thanks Larry
Larry Smith
1964 Futura
347 stroker
Evidently no one has one of these sitting around. Anyone know of an old parts car around that might have this still in it? Larry
Larry Smith
1964 Futura
347 stroker
Larry - I've got one, but was away and just got back on Saturday. And then the site was down earlier.
Anyway, It's apart at the moment and I just picked up a set of bearings (instead of the bushings) for it at the swap meet a couple weeks back. Was gonna replace mine in the wagon with it, but found my issue was the clutch and not the pedal assy.
It's yours if you want it. You'll need to reassemble it. All blasted and painted, but you'll probably powdercoat it. I work from home on Fridays, so that may be a good day for me if you want it.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Great, how much do you want for it. Larry
Larry Smith
1964 Futura
347 stroker
I only paid $10 for the bearing set, which you should use with this setup since one of the bushing flanges had "spun" and I had JB-welded it when I cleaned it up and before I painted it.
The bearings replace these flanges all together and you will have roller bearings instead of plastic bushings once done. So, that's all it will cost you - $10. I don't want anything for the pedals...
...I just want a ride in it when it is done.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
If you still have my number can you call me when it's convenient to drop by and pick it up? I'll definitely give you a ride when I get it done. Larry
Larry Smith
1964 Futura
347 stroker
Bookmarks