I have a 64 falcon coupe. I would like to redo the seats, what all will interchange , eather bucket or bench? thanks, Falcon1
I have a 64 falcon coupe. I would like to redo the seats, what all will interchange , eather bucket or bench? thanks, Falcon1
Denny Raymond
Marysville.
1964 Falcon
347 stroker, c-4
I have a bench seat from a '65 Ranchero for sale. It is rebuilt by a shop in Snohomish and a two-tone blue seat cover from Dearborn Classics installed by them also. Will post pics if interested.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
I don' t know if smith kid got my message, yes I would like pictures, and a price. Falcon1
Denny Raymond
Marysville.
1964 Falcon
347 stroker, c-4
I didn't get any message other that the thread starter. Here's a couple pics. I'll PM my fone# if you want to discuss price.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
The patern is way different than mine, darn it. I will have to mull it over. Thanks for the reply. Falcon1
Denny Raymond
Marysville.
1964 Falcon
347 stroker, c-4
A month or so ago I made a trip to the local wrecking yard and, with Roger's help, I found and bought bucket seats from a '96 Lexus for my Ranchero. I finally got them installed today. I'm very pleased with how they look and feel. Here's a couple pics.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
You may have the comfiest Falcon in the club! Lookin' good. How was the install? Just drill some new holes and bolt it in?
Kenny Likins
Ballard, Seattle, WA
www.redfalken.com
`62 Tudor Sedan (`69 200, C4, 8-inch 4-lug 2.79 rearend, Duraspark II, MSD, Weber 32/36 DGEV)
Those do look nice. Are you able to use the belts?
Jeff Watson
Seattle, WA
'63 Tudor Wagon (170 - 3 spd.)
The installation wasn't real easy. I do have to get the power to the drivers seat hooked up and a couple minor wrinkles taken care of. Some mounts had to be fabricated. I'm no welder, but Mr. Moore loaned me his welder and my daughter's boyfriend did the welding for me. I did get the associated 3-point seat belts and intend to use them, but as you've discovered, Jeff, some welding needs to be done, and as I said, "I'm no welder". So.... on to the front suspension and brake project, and I'll use the 2-point belts until.....
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
Very nice Gene. You do good work.
His 3-point belts will require the same modifications I did to my Ranchero, but the parts we got with these seats look easier to deal with than the Ranger setup I put in mine. So it should be (knowing what I know now) an easy Saturday project.
I like...
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Nicely done, I am riding with you to the next show!!!
Final work is done on the new buckets. Had to do a little re-aligning so the drivers side wasn't turned toward the center. Did the final electrical connections and ........ WOW, are they comfy! Wanted to go for a drive but Mr. Weatherman has put the kabosh on that. Have to save it for a later time.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
Nice work Gene. They look great!
Bill Proctor .. 1963 Falcon Sprint. Looking forward to learning new things.
I try to take the "fair weather driver" part seriously. The "seat belt installation" part of my garage door will be permanently available to you. I like your 3-points.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
Bookmarks