In the red circle is the "wire" (hollow) that goes to the squirter.
I'm pretty well ready to commence the cleaning process now. Maybe tomorrow. Today's my daughter's 21st B'day.
In the red circle is the "wire" (hollow) that goes to the squirter.
I'm pretty well ready to commence the cleaning process now. Maybe tomorrow. Today's my daughter's 21st B'day.
Last edited by SmithKid; October 25th, 2011 at 02:24 PM.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
You got it. That's the one I'm pretty sure I can figure where it goes.
Last edited by SmithKid; October 25th, 2011 at 02:29 PM.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
Good weather today. Rolled the Ranchero outside and did a little pre-cleaning in the engine compartment. Pressure washed, and then used Easy-Off over cleaner to remove most grease, then pressure washed again. Don't know if I'd use Easy-Off again as it removed 3/4 of the black paint and left the fender wells splotchy. I'm probably going to have to remove the rest of it to get a smooth base to re-paint. Oh well, I did get some fairly good training in another Ranchero under the hood as I mentioned before.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
I may have to use some of my elbow grease in there. Looks pretty clean though. Will cruise by and check it out.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
Just make sure to use the "good" elbow.. Looking good Gene.
Did all the parts make it over???
Yes, the parts all made it in fine shape. May change the color. Weird thing though; the crank pulley doesn't seem to fit the harmonic balancer, (about .020") too large where it drops into the center for alignment. May have to do some minor mod to it. Not sure yet. PM me where you would like some paperwork sent to, please. I forgot to get address from packaging.
Gene Smith
Fredrickson, WA
'65 Ranchero Deluxe
302, EFI, 4-Spd
Granada Discs
Bookmarks