Cool, give me a call if you find some and I will drive my self in that direction. Thanks, Larry
Cool, give me a call if you find some and I will drive my self in that direction. Thanks, Larry
Okay, I'm lost. What goes in the space between the roof rail trim and the wing window at the top edge? From the fwd edge of the roof rail the rubber seal bows up against the roof. There is about a 3" gap. Sure looks like something must go there but I can't find anything in my manual or on web sites. Even scarier I can't find any parts that look like they go there. Dufus Manufus (Larry).
I'm no expert with the HT... but look at some of the HTs on this site:
http://fordfalcon2000.com/featuredcars/JTurner65.htm
Select "Galleries" on the top to see the other cars. It looks like you may have the wrong window trim to me. Hard to tell from the small pictures but the others look like that piece is molded for the corner.
Maybe when you install the rest of the drip rail chrome, you will find the piece that fills that in.
Thanks Jeff, I viewed all those. Amazing how all the pictures seem to cut off that particuar area. There were three cars that I looked at and enlarged the photos and they seem to be blank on those cars also. Hopefully one of the members has a 64-65 hardtop and they can send me a pic. Thanks again. Larry
I got home really late tonight, so I'l have to look in the morning for that rubber stuff.
As for your current issue, the wing frame looks way low in that picture and where's the upper drip rail stainless? I think you'll find if you move all that into the picture, things may look different. I'm looking for some pictures too to help.
Roger Moore
63 "Flarechero"
powered by: 347ci stroker | Tremec T5 | 8" 3:45 TracLoc rear
I have put all the parts up into postition and there is a gap there. The wing frame is okay, must just be the camera angle. I did find a you tube video of a Falcon and it has that same blank area with nothing but the rubber seal. It looks kinda weird but??? Anyone of you 64-65 hardtop guys out there??
Got a picture from a 63 falcon owner on TFFN and I did have a part missing. spent an hour digging through all the junk parts that the guy gave us when we bought the car 18 years ago and I found them. They were beat to death. Spent an hour straightening them and then polished them up. Don't look brand new but better than the missing link!!!!
Maybe that was what the evolutionists were looking for all this time?????
Bookmarks