Reconstruction has begun.

[Luva65wagon]

I painted that Mustang I worked on and my 67 Pickup Satin Black (#7777 Rustoleum Enamel). Stealthy...

http://www.rainierfalcons.com/forums...read.php?t=507

[doghows]

Wow you guys have a good eye. The strut rods finally came loose. Lots of free-all and a few (lots) of 4 letter words. The sedan is stripped now and I have cut out the back cargo floor area, and the passenger floor area. I will cut out the drivers floor next and then it is down to the shop for a media blasting session.
The cowl area is not too bad, except for the passenger side. The ring is rotted out but the rest looks pretty solid. If this was not a rare car (1 of 113) I think I may have reconsidered the rebuild. But I have wanted one for 15 years so I am going for it.
I like the idea for paint. I started that way, but the wife wants blue with the panel in a silvery gray color?? I haven't made up my mind. She has her car so this one is mine. The powder coating shop logo is definitely going on the side.
Any how I will shoot a couple of more pics so you can see how much is cut off the car at this point and keep you all posted. Thanks for the support and input. Steve H.

[doghows]

Was looking at the post again and I missed a bunch of questions.
OK, I like the wheels those are going to the top of my choices list. i want something cool but not over used.
As far as the build; 347 stroker, AOD trans, 9" rear posi 4:11 gears. I am still on the fence for suspension. I ahve had a few good options from you guys so far just not sure if I am going with springs or air bags? Not sure on the steering yet either. Do I leave it stock or go with a rack and pinion?? I am going simple with the brakes. Disk front drum rear. I will keep the original trans just in case but the motor is a 200 6cly not the 144 so I will get rid of it. I'll keep the rear axle around as well, that way I can go back to original if the car becomes worth millions. (haha)
Anyway that is the plan so far. Look for more pics tomorrow with big hole in the floor area.

[doghows]

Ok here are some updated pics I took last night. I looked at removing the cowl piece. Wow that looks like a big job. Inner fenders dash and firewall all need to come loose??? Maybe I need to find an easier way to do that part. Any ideas???

[pbrown]

Maybe I need to find an easier way to do that part. Any ideas???

Another trick is to cut the cowl sides off. This is the area covered by the fenders. Cut both sides off and you get good but not great access to the cowl. Save the pieces and weld them back in place after the repairs are made.

That is a big hole. Really big hole. I see a couple of welders in the background. They will be getting a workout soon.

Now would be a good time to add subframe connectors.

[doghows]

Well I figured if I am replacing part of the floor, I might as well make it all good. I like the idea for the cowl. Mine already had places that have been cut out and welded back in so I think I will look at that first.
Sub-frame connectors are being ordered tomorrow. Who has the best ones. I was going to get them from Dearborn??
Anyhow in the background is a welder and a plasma cutter, both are going to be very handy real soon.
Thanks for the help and advise and I will keep you posted.

[pbrown]

Sub-frame connectors are being ordered tomorrow. Who has the best ones.

Global West

http://www.globalwest.net/1964-73_Mustang_Subframes.htm